Configuring the Nokia E-Series SIP for Nodephone (Internode)
By Leo Gaggl
This is Part 3 of the Nokia SIP settings. This time for NodePhone (Internode – Australia). It has been hard to find this information (particularily the Registrar Server settings). NOTE: The Realm setting in the Registrar Server are CASE-SENSITIVE. For some screenshots check the ENGIN Australia setup entry.
General
Profile name: nodephone
Service profile: IETF
Default access point: {Your WLAN Access Point}
Public user name: sip:{NodePhone Phone No}@sip.internode.on.net
User compression: No
Registration: When needed
Use security: No
Proxy Server (not required)
Proxy Server Address: none
Realm: none
Username: none
Password: none
Allow loose routing: none
Transport Type: none
Port : none
Registrar Server:
Registrar Server Address: sip:203.2.134.1
Realm: BroadWorks (Note:CASE-SENSITIVE)
User name: {NodePhone Phone No}
Password: *****
Transport type: UDP
Port : 5060