One common task for my Raspberry Pi Zero with (infrared) Camera is to do still image capture in regular intervals and upload the images for storage and post-processing. A simple way to achieve this with standard software tools available in the Raspberry Pi OS repositories is to use the S3 CLI tools and a simple bash script run by a scheduled cron job.
The Siemens IoT2000 series has been a very interesting development from Siemens and it’s really encouraging to see the use of Open Source in the Automation sector definitely on the increase. And that can only be a good thing for developer productivity. Seeing a different IDE for each manufacturer of a PLC invokes some nasty memories of last century web-application development…
Siemens Simatic IoT2000Unfortunately, all the documentation for these units still assumes a Windows PC. And since I have not really been using a physical Windows machine for 10+ years now, that is really slowing things down. For the last few I didn’t really have to fall back to a VM, largely due to the fact that in web-development nobody cares about OS any longer. But I have a feeling that shifting my focus to the IIoT space this VM will get a bit more useful as some of these manufacturers don’t even bother with anything but Windows and are challenged enough to keep up with Windows upgrades.
As the convener for the Adelaide community of The Things Network, I am frequently setting up Multitech Conduit Gateways. Depending on your PC or notebook hardware you might have some problems with the Exar USB-UART driver on Linux.
Here are the steps to getting this unit setup from an Ubuntu (should work for any other Linux distro) machine.
lsusb
Should show something like this:
Bus 002 Device 006: ID 04e2:1410 Exar Corp. XR21V1410 USB-UART IC
Having just wasted a few hours on getting this Java software running on Linux I am documenting this for future reference and hopefully saving other LoRa / TTN folks some time.
Prerequisites
Install a Java JDK + JavaFX. This should work with the default OpenJDK 8 or 9 which comes as part of the Ubuntu repositories. I ended up installing Oracle JDK 8 as well as I thought the error might be related to OpenJDK.
Since there is now a supported Raspbian version without GUI and other unneeded add-ons available as Raspbian Lite the need to use other installers (with sometimes some downsides) is now not a necessity anymore. Below is a list of steps I like to perform before using them for any purpose as my Standard Operating Environment.
Finally found some time playing with a RaspberryPi and an attached PiFace Interface board to control some garden pumps and potentially an Aquaponics setup in the near future.
Requirements
Raspberry Pi (Model B in my case, but any will do)
With the Internet of Things slowly becoming mainstream the potential uses of this technology can also be seen in the Education sector. This blogpost is the first installment of a series of posts that highlights practical examples that can be used in teaching and training.
Part 1 – Environmental Noise Monitoring
[](http://www.flickr.com/photos/leeander/3544687577/)
[](http://creativecommons.org/licenses/by-nc-nd/2.0/) by [ leeander](http://www.flickr.com/people/leeander/)[ ](http://www.imagecodr.org/)
Noise pollution has been a serious problem in many large cities all over the world and with the help of common mobile devices (smartphones) this can be easily measured, monitored and compared with a large quantity of samples from other cities/regions.
